We strive for excellence in everything we do.

TECHNOLOGIES

Our horizon of experience has developed significantly over the last 40 years, which is why we rely on the latest Injection Compression and other technologies in back injection or fIN THE set. Get an overview of our methods and technologies.

INJECTION COMPRESSION

In this process, plastic is injected into a slightly open mold. During or after the injection of the plastic, the melt is shaped into the final shape by closing the two halves of the mold.

COMPRESSION GATING

With this one, especially for injection compression molding developed technology Is it possible Separating a film bond from the article during the injection compression molding process.

TURNTABLE MOLDING

Multi-component injection molding
by means of a turntable
on the moving side
an injection molding machine.

SPIN MOLDING

Multi-component injection molding using a turning plate with two parting lines and two opposite aggregates.

BACK INJECTION

A decor from
Textile, PVC, foil, precious wood, metal
or other materials
placed in a tool
and back-injected with plastic.

IN MOLD CUTTING (IMC)

also In mold trimming called, the decor protruding over the component edges is trimmed in the tool during back-injection. This is possible flush with the edges as well as with an overhang for a subsequent break.

FILM INSERT MOLDING (FIM)

With FIM, a preformed or non-preformed film that can be cut is placed in a tool and back-injected with plastic.

DIRECT GATING

In the direct injection molding process for an optical component, a back gate of the first component is overmoulded with a second component.

IN MOLD DECORATION (IMD)

Using IMD, a decoration or protective coating is transferred from a transfer foil to the component during the spraying process.

GAS INJECTION

In the GIT / GID process, after the plastic has been injected, cavities are created in thick-walled areas by means of gas injection.

THERMOFORMING

This method is used to adapt foils to given contours. This is usually done via IR emitters.

clear melt

The trade name Clearmelt or Direct Skinning means a combination of injection molding (thermoplastic) with a finish (paint/PUR) produced directly in the tool.

IME Inmold Electronics

IME inmold electronics is a technology that can be found in both the automotive and electronics sectors.

Multi-color multi-injection multi-layer

Multi-colored, multi-layer, multi-component plastic parts are being used more and more frequently both in the automotive sector and in consumer goods.

block tools

Some plastics for special applications are very expensive and cannot be produced in an extrusion process.

Free flow gating

Any disruption in the hot runner system such as torpedoes, multi-hole tips or valve gates will cause irritation in the melt.

gripper construction

In addition to our technologies and injection molding tools, we would also be happy to supply you with the right handling or gripper system.

contract manufacturing

In addition to the manufacture of injection molds, we also offer contract manufacturing of precise milled components.